How do you know if your Christmas lights are LED?

by | Dec 9, 2019

Or How do I know if my LED Christmas lights are incandescent or LED?

Short Answer

While it is sometimes confusing to tell them apart, there are a few differences between LED and incandescent Christmas lights. Knowing the signs will help you identify your style of light strings if it isn’t immediately obvious. Look for heating up under operation, the presence of a filament, glass or plastic bulbs, color quality, and how many you can run in series to determine which style of lights you are working with.

Long Answer

Take a few simple steps to determine if your lights are incandescent or LED.

  1. Look for glass bulbs. If your Christmas lights have glass bulbs then more than likely they are incandescent, not LED. Ninety-nine percent of the time (we have seen glass LED bulbs in the marketplace but these are uncommon) if the light bulb in a string is glass the set is not LED.
  2. Do the lights warm up? Incandescent lights make light by heating a filament. (They warm up.) LED lights create light when protons are energized and travel through valence/energy bands. Light is produced as they move to a lower level energy band and give off energy/light. This is a super complicated way of saying they don’t create light with heat. So, if your lights are plugged in for half an hour and they are still room temperature, more than likely they are LED.
  3. Look at the bulb to see if you can actually see an “old-fashioned” filament in the bulb. Especially in mini lights (small Christmas tree lights) this is a pretty clear indication that the lights are NOT LED.

    Keep in mind that in larger, retro-style bulbs, some LED manufacturers are synthesizing a type of “filament” to give them an incandescent look. AND! Sometimes they are even glass. In this case go to suggestion #2 and see if they warm up.
  4. Take a second look at the color. LED lights have a different look than traditional lights especially in the colors (red, green, blue) and pure, bright white. LED lights have a more “electric” look.

    Here is a photo of a row of LED and incandescent icicle lights installed on the same roofline. This perfectly illustrates the visual difference between the two styles of lights. The light strings on the left are LED and the warmer lights on the right are traditional incandescent string.
How do you know if your Christmas lights are LED?
How do you know if your Christmas lights are LED? 2

The filaments of incandescent bulbs tent to make the color of the bulbs lean more towards the yellow side of spectrum.

  • 5. Read the tags on the lights or read their box to see how many can be run in series. As a rule of thumb with a standard 22 gauge wiring, incandescent lights can only be run with 500 bulbs total in series. That’s 5 100-light strings or 10 50-light strings.

    LED lights can be run 20, 30, 40, or more light in series in a single run so if your light sets have this kind of specification, they are more than likely semiconductor rather than incandescent based.

Summary

If you aren’t sure if you have LED or incandescent lights take the following steps:

Check to see if the bulb outer casing is glass or plastic

  • Turn them on for 20 minutes and gingerly touch a bulb to see if it’s hot
  • Look for a filament
  • Ask yourself if the color of the light string is other-worldly
  • Find out how many you can run in series

Regardless of what types of lights are in your installation, operate them with supervision, install them with common sense, and have a Master Electrician check out your project if you have questions about the condition of your wiring, your wiring diagram, or if you blow a breaker.

Recent Posts

Get this Look: Traditional Glass C9 Bulbs

Get this Look: Traditional Glass C9 Bulbs

This project used 625 LED bulbs installed into SPT-2 cord purchased in a bulk spool. To create this look, start with this supply list. Materials C9 Spool 1000-feet 9 inch spacing green wire SPT-2 C9 White Glass Light Bulbs C9 Rubber O-Ring Green Male Gilbert Plugs...

read more

2 Comments

  1. Lori Putnam

    I don’t understand this sentence, so figured you’d want to take a look…. ” LED lights make lights by energizing protons through valence bands or a semiconductor substrate (hence the name Light Emitting Diode) and light is produced as they to a lower level energy band. ”
    🙂

    Reply
    • Shellie

      Thanks Lori,

      I’ve taken another look at that sentence and hopefully, it makes a little more sense!!

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Related Blog Posts

FAQ: What do I use to outline my roof?

FAQ: What do I use to outline my roof?

What do I use to outline my roof?During Christmas, a few basic materials are used to outline rooflines with lights. The list includes C7 or C9 Christmas cords, bulbs, commercial clips, and gilbert plugs (both end and inline). You'll also need wire snips and...

read more
Are C7 and C9 bulbs the same?

Are C7 and C9 bulbs the same?

Are C7 and C9 bulbs the same?Short Answer: No, they are very similar but are different sizes. Continue reading the long answer for photos and more information. Longer Answer: C7 bulbs are shorter with smaller diameters than C9s. Both are installed in 18 AWG...

read more
Christmas Lights Lingo!

Christmas Lights Lingo!

Common Christmas Lights Terminology and Vocabulary 5mm This is a shape of LED lens that is about the shape of and slightly smaller than a pencil eraser. It has been referred to as "wide angle" and "conical" in the past since there is a cone shape molded into the lens...

read more
Get This Look: Using Gilbert Plugs

Get This Look: Using Gilbert Plugs

Brian from Oregon purchased 100-foot Christmas light cords, cut them to length, and used gilbert plugs to connect the lights to power and to each other. Here is what he had to say: Easy to UseGreat product and super easy to use. I bought 2 100ft rolls so I could make...

read more
Mini Light Spacing Discussed

Mini Light Spacing Discussed

There are 3 standard spacings for mini lights. Choosing the best spacing is essential for a polished project and can be tricky. We hope a quick visual will help you decide. Here are those three spacings: Standard Christmas Light Spacing A word about lengths of...

read more
Get This Look: Our Christmas Angel

Get This Look: Our Christmas Angel

Ed from Crawford, TX sent us this photo of his beautiful angel project. Here is what he had to say: Earlier this year I contacted you for help in securing lights and clips for our Christmas Angel. We had the angel for years but weather and time took their toll on not...

read more