Installing 12 volt Christmas Lights in Your Car

by | Mar 11, 2017

Installing 12 volt Christmas Lights in Your Car

We exchanged emails with a customer who installed our 12-volt lights in his car for the Christmas season. The discussion touched on quite a few questions that we hear so we thought sharing the email thread might help other folks as well.

Here was the first question:

Question
The cigarette lighter male end looks to be extremely long and space consuming and space in that area of mycar is very limited. Is there anyway I could hook it up to one of these and connect it to a cigarette port USB charger?

Here is what I’m thinking:  USB A Male to 12V Car Cigarette Lighter Socket Female Converter

Here’s a photo of this converter courtesy of Amazon.com:

Installing 12 volt Christmas Lights in Your Car


My response:

I THINK that this product might work with our lights but since we have no experience, I’m really unsure about how to answer your question.
Our lights have a .1 amp current draw so it should be sufficient.
I cannot with great confidence answer your question. <smile>
If you try this and it works, please let me know.  Have a Merrry Christmas!
Shellie
In a couple of weeks we received this email:
Hey just a heads up, it works. Something to pass on to your customers in case they’re like me. Lights work great, thanks again! 

That’s the other main reason I did it, I didn’t want to have to plug it and unplug it every time I turned my car on and off, respectively. I fished the wire under the center console through the shifter, underneath the glovebox, underneath the weatherstrip and trim past the A pillar and into the B pillar. From there I fished the wire through the weatherstrip in the crease or the rear passenger door and reinforced that section with heavy duty electrical tape to protect it from opening and closing door. Wrapped it around the roof bars after that. Except for that small piece of wire running to the roof bar, made for a near clean and hidden install. And the best part is when its time to take them down, I can store the end that connects to lights in the trim and tuck it away until next year instead of having to rewire everything again.

Thank you, likewise Merry Christmas to you as well.

 

Here are photos of the complete project:

Installing 12 volt Christmas Lights in Your Car


Installing 12 volt Christmas Lights in Your Car


Installing 12 volt Christmas Lights in Your Car


Installing 12 volt Christmas Lights in Your Car


Installing 12 volt Christmas Lights in Your Car


Installing 12 volt Christmas Lights in Your Car

Recent Posts

Get this Look: Traditional Glass C9 Bulbs

Get this Look: Traditional Glass C9 Bulbs

This project used 625 LED bulbs installed into SPT-2 cord purchased in a bulk spool. To create this look, start with this supply list. Materials C9 Spool 1000-feet 9 inch spacing green wire SPT-2 C9 White Glass Light Bulbs C9 Rubber O-Ring Green Male Gilbert Plugs...

read more

6 Comments

  1. Dorald Keefer

    I would be more concerned about the additional lighting added to your vehicle. I know some police do not like “auxiliary” lighting on automobiles. My son was ticketed for having wheel well lighting as being unnecessary auxiliary lights not approved by DOT or as “standard” equipment. I tried to argue it with the authorities by citing as an example, all the extra auxiliary lighting some semis have but since they are interstate only the state in which the truck was registered in can enforce whatever law / regulation / whatever code they have on the books. . . Just say folks.

    Reply
    • Shellie Gardner

      Thanks for the good word. Who would have thought? I guess we’ll all have to check with our local authorities. It is good to know this before I drive to through other states with lights and garlands on my luggage rack!

      Reply
  2. Colin Walsh

    I would also like to know if these wires can be cut and connected directly to a 12v rv light?

    Reply
    • Shellie

      Because these types of lights are LED with low current rated wiring, we don’t suggest you cut them for installation.

      You might consider a 12-volt female socket to clip adapter and connect directly to a battery. They can be found at some electrical supply stores and on amazon. (Be sure to check the reviews!)

      Reply
  3. Jeremy Steiner

    Can these lights be directly wired into the parking lights wiring to come on with the parking lights or do you have to use the lighter adapter?

    Reply
    • Shellie

      Most of our customers use the lighter adapter – either plugging it in directy or plugging them into a 1 to 3 or 4 adapter with a switch. We’re not sure what any kinds of codes or regulations are in your area regarding this type of lighting connected directly into your braking circuit so you might consider researching that as a first step. (Great question, by the way!)

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Related Blog Posts

Christmas Lights Lingo!

Christmas Lights Lingo!

Common Christmas Lights Terminology and Vocabulary 5mm This is a shape of LED lens that is about the shape of and slightly smaller than a pencil eraser. It has been referred to as "wide angle" and "conical" in the past since there is a cone shape molded into the lens...

read more
LED Bulbs: Comparing the Whites! 2022 Edition

LED Bulbs: Comparing the Whites! 2022 Edition

This year, we are releasing Natural Pure White, the third available color white in our LED product line. Commercial C9 LED bulbs with E17 bases and 5mm light strings have been released for the 2022 season. More versions will follow next year. Here is a photo comparing...

read more
Top 10 Christmas Lights Questions

Top 10 Christmas Lights Questions

We've been answering customer questions for 16 (almost 17!) years. Here are a few of the technical questions we hear most often. How do I light a really large tree? This project provides a great reference for large tree projects....

read more
Get this Look: Light Up a Truck for Christmas

Get this Look: Light Up a Truck for Christmas

Larry has been a long time customer of 12-volt multicolor Christmas lights. Here is what he had to say: Look greatI have ordered sets of these and have them on our vehicles and my son put them on his boat and golf cart. All work perfectly and get lots of compliments....

read more
5-Minute Project: 4th of July Glass Block

5-Minute Project: 4th of July Glass Block

Glass blocks aren't just for 80's decor. Available at local hobby and craft shops, they are now made with one side open so drilling is no longer required. If you have a glass block in your crafting stash, add a set of craft lights and patriotic gel clings for a...

read more