Texas Lawn Sculpture Outlined with LED Lights

by | Dec 8, 2013

Texas yard sculpture with lights

Texas Merry Christmas!

I spoke to Dan up in Flower Mound, Texas when he ordered his lights for his yard sculpture and he kindly sent us a photograph of his project.

We love that it wishes everyone a Merry Christmas in a very Texas kind of way!

We asked him a few questions. (We knew you’d ask and got the answers for you in advance!)

Where did you get your frame?  Did you make that?

We bought a finished product from a couple in Irving about 30 years ago.  He welded the frames and his wife strung the lights.  The first time I did the restringing it was not quite as good as the job Judy did.  Each time I have gotten a little better.  This is the 3rd time I have had to restring the lights.  Each stringing has lasted about 7 years.  This is the first time I have used LED lights that had to go end to end.

How did you make the words?

The words are part of the frame, also welded into place.  Lights are strung to each letter dense enough to show letter and little space.  As you can see some are better than others.

(Many times, the light bulbs are installed “with” or parallel to the frame.  The way Danny has installed the LED lights so they point out at you puts the lights really close to each other and makes a great outline – almost like rope light.)

Did you use wire ties to attach the lights?  Is that extra wire just looped behind the frame that I see in the photo?

I used 4” wire ties to secure each light sometimes I had to use a tie on each side of a light, depending on the lean and twist of the wire.  The wire between each bulb is looped and held snug against the back by the twist of the turn I put on the wire.  Most of the time it works but sometimes it turns a way I would prefer it not so I create space or tightness in the next light or I make it up as I go along.

At each plug in I try to tie it to the other wires in such a way that they are fairly neat.  The hardest part is figuring out how much of each letter is covered by each strand of lights, do you string the top or bottom half of the letter first and how do you make the transition to the row above or below and how can you string those letters.

I looked at the basic frame a long time before I started with the LED’s.  I had to cut many wire ties and rewire runs of what I had already done to make things work sometimes.

Thanks again for your help.

If you’d like to try this at home, may we suggest:

Recent Posts

Get this Look: Traditional Glass C9 Bulbs

Get this Look: Traditional Glass C9 Bulbs

This project used 625 LED bulbs installed into SPT-2 cord purchased in a bulk spool. To create this look, start with this supply list. Materials C9 Spool 1000-feet 9 inch spacing green wire SPT-2 C9 White Glass Light Bulbs C9 Rubber O-Ring Green Male Gilbert Plugs...

read more

2 Comments

  1. Dorothea Pitikas

    Is there somewhere I can purchase this? I saw one last night on display in Johnson City.

    Reply
    • Shellie

      Unfortunately, we purchased this sculpture from a friend of the woman who was building. I think she was stopping and as far as I know I don’t think she is making them any longer.

      Hopefully, if anyone knows differently, they can post new information here!

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Related Blog Posts

Get This Look: Our Christmas Angel

Get This Look: Our Christmas Angel

Ed from Crawford, TX sent us this photo of his beautiful angel project. Here is what he had to say: Earlier this year I contacted you for help in securing lights and clips for our Christmas Angel. We had the angel for years but weather and time took their toll on not...

read more
LED Bulbs: Comparing the Whites! 2022 Edition

LED Bulbs: Comparing the Whites! 2022 Edition

This year, we are releasing Natural Pure White, the third available color white in our LED product line. Commercial C9 LED bulbs with E17 bases and 5mm light strings have been released for the 2022 season. More versions will follow next year. Here is a photo comparing...

read more
Get this Look: A Multiple Color Christmas!!

Get this Look: A Multiple Color Christmas!!

Thank you, Stephen, for sending us photos of your Christmas lights display. We enjoyed seeing the fun color combinations created using different styles of plug-and-play LED Christmas light strings. Projects like this are based on the types of products listed below....

read more
Get this Look: A Multicolor Traditional Christmas

Get this Look: A Multicolor Traditional Christmas

We love Wade's traditional outlined roofline for Christmas. Using triple-dipped glass bulbs, the color is rich and nostalgic. Standard glass bulbs have two coats of paint. As the name implies, triple-dipped have three resulting in rich colors at the tradeoff of being...

read more
Get This Look: LED Trees!

Get This Look: LED Trees!

We love this festive family of wire-frame and (and one natural) Christmas trees! Jim W. had this to say about them: Excellent products & Quick DeliveryLED 5 mm lights were excellent for my Christmas project. Green wiring also contributed to the nice...

read more