Tips while Hanging Outdoor Christmas Lights

by | Nov 27, 2016



Every day we field calls from customers asking about installing lights.

  • Do I really need a surge protector?
  • How do I hang Christmas lights on my gutters?
  • Will magnetic clips work on my siding?


Here are a few of our best suggestions and reminders as you install your Christmas lights.

(In all things use common sense and seek professional assistance when it comes to high rooflines and electrical questions.)

Make a Plan

First things first, put pen to paper and use the measurements of your home to estimate how many lights you’ll need.  Don’t forget your shrubs, windows, and doors as well as your walkways and rooflines.


Locate all of your outlets as you make your plan and make sure that all the outlets you use for your Christmas lights are GFCI rated.

If you don’t have access to a GFCI plug, an electrician can install one for you.

Use Surge Protectors.

Always plug your lights into an outdoor rated surge protector – especially if you are using LED lights in any part of your Christmas lights display.

Surges on the line are your LED light string’s nemesis.  If you live near hydroelectric or geothermal power generation, you may have more to worry about.

Extension Cords

Choose outdoor-rated extension cords in a color that match your winter landscape

Keep the plugs out of the rain, snow, and weather. (Note the winter landscape in Texas would be green or brown.)

Male Plug End

Start with the male plug end.  When wrapping trees and columns with multiple strings of small lights (LED Christmas lights or incandescent Christmas tree lights) start with the male end of the cord at the base of the project, wrap up the column and end with the female plug end (if there is one).  Then you can just plug in the next string of light and continue.

Many times, as trees are wrapped, the tension of the light strings will keep the strings “secure” on the trunk but if your tree is a smooth variety – for example, aspen – you may need to install a product like a Quik Klip that fits any smaller gauge wire light string with a small nail that can be removed after the season.

Do not use a staple gun or any other method that could puncture the lights when installing them on trees.

If you are wrapping a limb, spiral out with a really long “spiral” because you’ll need to spiral back down the limb to the trunk to keep extension cords in the core-area of you tree.


Check your lights as you go

When working with string lights plug them in regularly as you install them to see where you may have an issue or a bare spot. 

If you started with the male plug – see item #3, this won’t be a problem.


Install and test before you climb a ladder

When using individual bulbs and cords, install your bulbs and test them on the ground. 

Reduce the chances that you’ll have to climb back up the ladder and heaven forbid if you’ve rented a cherry-picker that you find out the topmost string of lights has an issue after you’ve returned your lift.

When using glass bulbs, order extras to account for breakage in your installation.


Choose the best clip for the job

Many clips do double-duty as shingle-edge clips and flip around to install on your gutters. Most commercial clips work with traditional C7 or C9 stringer wire constructed with 18 AWG wire — many won’t work with pre-wired LED strings.

Be sure to understand how the clips you are considering work with your lights.

A nice choice for a wide variety of applications is an All Application Clip.  It works with traditional bulbs and cords and pre-wired strings.

We’ve put together a handy get-started guide based on your application on our Clips and Hooks page.


Magnetic clips are fantastic but test first to make sure they’ll work

Magnetics are a great clip for metal roofs and for installing C7/c9 cords and bulbs along metal flashing. Be sure to test any surface you think might be magnetic with a common household magnet.  We’ve already seen a handful of returns this season from folks who were convinced their metal siding would work.




Keep in mind these clips work only with 18 AWG traditional C7 and C9 Christmas light cord. They aren’t compatible with pre-wired sets that have a wiring harness that comes out of the bottom of the bulb base.



Don’t run too many light string sets in series

Obey maximum connectivity guidelines – check manufacturer specifications. Currently, new incandescent glass mini lights are UL rated for up to 210 watts of lights maximum series run.  That generally means that for many models of string lights up to 5 strings of 100-light strands and 10 strings of 50-light strands can be run in a single circuit.

Make use or splitters to organize your runs of lights but keep an eye on not exceeding 80% of your household breaker maximum capacity.  (Great question to run by your electrician.)

Remember that LED light strings that are pre-wired with a 2 or 3-wire wiring harness can be run many hundreds of feet but 18 AWG socket cord with installed bulbs cannot be run longer a maximum of 250 feet no matter what bulb is installed – LED included.

If you need to run 100’s of feet of lights on a single plug or a single continuous series circuit the LED Christmas light strings are your best and only option.

Note, most 50-foot and 100-foot commercial grade C7 and C9 cords are not shipped with end plugs.  Make good use of T’s and extension cord splitters to install your lights.

For example: If you need to run 200 feet of lights and are using 100-foot cords with single male connectors, run an extension cord to a center point in your installation and run the two cords out in a T configuration.

Be sure to turn off your lights when you leave or before you go to sleep.


Use common sense

Take common sense safety precautions. Make sure your ladder is on a solid surface and if your roof is steep call in the professionals.

Know your house.  If you home has aluminum wiring, you’ll need to consult with an electrician. Your wiring may not be able to accommodate the same electrical load as copper.


Have an electrician check your work

A Must Do:  Hire an electrician to check out the breakers in your service and verify your C7 and C9 cords are properly installed to electrical specifications. We’ve found in talking to folks that everyone has an electrician on speed dial, have an electrician friend or best yet, an electrician brother-in-law.

Your electrician will also be able to advise you if your lighting display is exceeding your maximum breaker rating.

So, his or her visit should be looked on as a natural step in your Christmas light installation.


Our final notes: Hire a professional, bonded Christmas light installation company or Master electrician if you have any questions at all about the electrical aspects of your Christmas lights display.

Here is our “fine print”: assumes no responsibility in any event for payment or incidental or consequential damages, including, without limitation, costs relating to removal, installation or reinstallation of the products, or damages for personal injury or property. These products may present possible shock or fire hazard if not installed properly. This warranty is voided for products not installed according to current local codes and/or the National Electric Code.


Recent Posts

Get this Look: Traditional Glass C9 Bulbs

Get this Look: Traditional Glass C9 Bulbs

This project used 625 LED bulbs installed into SPT-2 cord purchased in a bulk spool. To create this look, start with this supply list. Materials C9 Spool 1000-feet 9 inch spacing green wire SPT-2 C9 White Glass Light Bulbs C9 Rubber O-Ring Green Male Gilbert Plugs...

read more


  1. Sophia Slate

    Thank you for stating that when using glass bulbs, you should order extras in case any of them break. My sister wants to hang up Christmas lights outside her house this year but doesn’t know how to go about putting them up. I will definitely pass along all of your great tips and information to my sister so she can successfully put her Christmas lights up.

  2. Jennifer

    I live in an apartment with no outdoor outlet. I bought a connector so I could plug my cord into my porch light. I read that you can use the middle t part of 2 cords to start a new cord of lights. My concern is how many cords can you run off one outlet. I want to decorate all my bushes, outdoor tree, wreath, snowman, etc but only have the porch light as an outlet. Is this safe to do if I use multiple cords and t them off? If so…how many cords are safe?

    • Shellie

      That’s a tricky question without knowing the wattage of all of your lights and the rating of your breaker. Your concerns are valid and you do need to worry about overloading that outlet. Your best next step is to speak with the apartment facilities personnel/electrician to confirm what you can safely run off of your outlet by showing him your lights and plans for installation. Overloading a circuit can be hazardous and cause a fire.


Submit a Comment

Your email address will not be published. Required fields are marked *

Related Blog Posts

Are C7 and C9 bulbs the same?

Are C7 and C9 bulbs the same?

Are C7 and C9 bulbs the same?Short Answer: No, they are very similar but are different sizes. Continue reading the long answer for photos and more information. Longer Answer: C7 bulbs are shorter with smaller diameters than C9s. Both are installed in 18 AWG...

read more
Christmas Lights Lingo!

Christmas Lights Lingo!

Common Christmas Lights Terminology and Vocabulary 5mm This is a shape of LED lens that is about the shape of and slightly smaller than a pencil eraser. It has been referred to as "wide angle" and "conical" in the past since there is a cone shape molded into the lens...

read more
Mini Light Spacing Discussed

Mini Light Spacing Discussed

There are 3 standard spacings for mini lights. Choosing the best spacing is essential for a polished project and can be tricky. We hope a quick visual will help you decide. Here are those three spacings: Standard Christmas Light Spacing A word about lengths of...

read more
Get This Look: Our Christmas Angel

Get This Look: Our Christmas Angel

Ed from Crawford, TX sent us this photo of his beautiful angel project. Here is what he had to say: Earlier this year I contacted you for help in securing lights and clips for our Christmas Angel. We had the angel for years but weather and time took their toll on not...

read more
LED Bulbs: Comparing the Whites! 2022 Edition

LED Bulbs: Comparing the Whites! 2022 Edition

This year, we are releasing Natural Pure White, the third available color white in our LED product line. Commercial C9 LED bulbs with E17 bases and 5mm light strings have been released for the 2022 season. More versions will follow next year. Here is a photo comparing...

read more
Get this Look: A Multiple Color Christmas!!

Get this Look: A Multiple Color Christmas!!

Thank you, Stephen, for sending us photos of your Christmas lights display. We enjoyed seeing the fun color combinations created using different styles of plug-and-play LED Christmas light strings. Projects like this are based on the types of products listed below....

read more