Get This Look: Lighting a solar powered house with 12 Volt lights

by | Nov 22, 2014

My conversation with Melissa started with this question:

Hey Shellie, we love our 12 volt lights and are interested in more.  It looked like the product we wanted is out of stock.  Do you know when it will be available again?  In the attachments are two photos of the lights used in our house with our 12 volt solar electric system.  I wish I was a photographer so that I could capture it better but I am not.  Melissa

We had such a run on our 12 volt LED lights this season that the exact version that Melissa wanted will be out of stock until about July of next year. Fortunately we have warm white lights on white wire that might be a good fit for her.

What really interested me was the idea that they are running their home off of solar power.

Here are a couple of photos of what Melissa’s lights look like use as exterior lighting powered by their solar batteries:

IMG_2071

IMG_2070

 

Here are Melissa’s responses to my questions. I thought that for many of our customers these responses would be interesting.

How did you connect the lights into the system?

The lights are mostly attached to the celling but also the trim at the top of the wall.  In places where there are objects up high near the ceiling (like a shelf), the lights outline the object so that more light is brighter in the room.  So the light are not just in a rectangle around the room. 

Is your entire house run on your 12 volt solar system or just the lights and a few extras?

What kind of battery configuration do you use to keep your lights on at night?  Is it a bank of batteries that came with your solar panels?

I can tell you a bit about how the solar electric system is set up and works but I have quite limited knowledge and there are a lot of electrical code that I do not know all the details about. We had a solar electrician install most of our solar system.  So this is a general over view.  
 
 The lights work great with our solar system because we have a 12 volt solar system. (The kind of batteries and way they are wired together determines if the system is 12, 24 or 48 or more volts.  The lights will only work if you batteries are wired so that they are 12 volt.   The lights barely use any watts which is important since  we have a fairly small system.
 
This is how our solar system works.   The electricity is created in the panels, and goes through a charge controller (which is like a little brain that adjusts the current and volts of the electricity based on what the batteries are needing).  The batteries come after the charge controller.  Our 2 batteries are 6 volt so they are wired in series which makes a 12 volt system but keeps the amp hours the same.   These batteries are charged during the day and then we use the energy at night to run our lights and other things.
 
As a side note: there is a breaker (if not two) inbetween each component (panels, charge controller, batteries, lights)  and the wire size needs to be determined based on how much electricity is running through it and how far it is traveling.
 
Since the lights are 12 volt DC, we do not have to use our inverter.  The inverter converts the DC electricity in our batteries into AC   (which is what most houses run on)  We use our inverter for other things but it is most energy efficient to run things directly from the batteries rather than through the batteries and then the inverter. 

Converting from DC to AC involves energy loss and some energy is also lost in running the inverter.   Since solar electric energy is expensive, the first thing to do in getting a solar electric system is to cut as much electricity needs as much as possible – thus the 12 volt lights. 
 
So our whole house is not run on 12 volt so for some of our electrical needs, like running the computer or blender. we turn on the inverter which converts the energy.  We have 12 volt lights, fan, fridge, and freezer.  We would have more 12 volt things since it is more energy efficient but 12 volt things is that they are hard to find and we have not had time to put energy into that. 
 
We have a car charger outlet option in our house, so we could use the car charger piece that comes with the lights.  We wanted it on a switch so we cut the wire and wired it to a switch next to our door.  The lights and wire travel all the way around the room and then meet up again to create a closed system.
 
Although people can buy a “plug and play” solar electric system, we picked out each individual component based on our specific needs.  So the panels and batteries and charge controller and there items all came from different companies. 
 
I hope that is somewhat helpful and not to confusing of an explanation.  I was just on the phone with a solarelectric dealer to buy some other components yesterday.  My head hurt after talking to them because there were using so much terminology that I could not follow them with my limited knowledge.  It is like learning a different language. 

It’s great to hear how some of our lights complement Melissa’s system.

I hope this interview is as interesting to you as it was to me.

Dave and I will be exploring solar power to help offset the cost of heating and cooling during Texas summers and winters. We hope to start exploring this in the Spring after the busy season and before it gets too warm.

We’ll keep you posted.  If you have experience with solar power, please post your experiences below.

Recent Posts

Get this Look: Traditional Glass C9 Bulbs

Get this Look: Traditional Glass C9 Bulbs

This project used 625 LED bulbs installed into SPT-2 cord purchased in a bulk spool. To create this look, start with this supply list. Materials C9 Spool 1000-feet 9 inch spacing green wire SPT-2 C9 White Glass Light Bulbs C9 Rubber O-Ring Green Male Gilbert Plugs...

read more

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Related Blog Posts

Get This Look: Multicolor Roof and Walkway

Get This Look: Multicolor Roof and Walkway

This Christmas light display uses classic glass multicolor bulbs installed in commercial C9 Christmas cords. We love the crisp lines along the roof and the curvy accented flowerbeds. Get this Look: Multicolor C9 Glass Bulbs and Cords! 500 Bulbs C9 Multi Transparent...

read more
FAQ: What do I use to outline my roof?

FAQ: What do I use to outline my roof?

What do I use to outline my roof?During Christmas, a few basic materials are used to outline rooflines with lights. The list includes C7 or C9 Christmas cords, bulbs, commercial clips, and gilbert plugs (both end and inline). You'll also need wire snips and...

read more
Get this Look: Light a glass block, add a bow!

Get this Look: Light a glass block, add a bow!

Fun project using craft lights We love how easy it is to create a "faux gift" with a glass block, a string of craft lights, and a bow that matches the surrounding decor. Twenty years ago, a hole had to be drilled through the...

read more
Get this Look: Fantastic LED Christmas Display

Get this Look: Fantastic LED Christmas Display

We love the look of this customer display. Built over several years, this display has grown to include several product lines. To match the look in this photo, consider the following collections of products. Roofline: LED Icicle lights Lights twisted into the garland...

read more
Get this Look: White Lights and Snow

Get this Look: White Lights and Snow

Minnesota Christmas Lights Installation We love the Minnesota snow in this customer's photo. We also loved what he had to say: Classic look I have these C9 LEDs outlining the front roofline of my house. I was a little concerned they wouldn't be very bright being...

read more