Why are Christmas light measurements approximate?

by | Jul 29, 2019

If you’ve been shopping for Christmas lights for a couple of Seasons, you may have noticed that most measurements on Christmas lights are followed by approximate, or approx. And you may be asking yourself, “Why is that?”

Interestingly enough, the answer is simple. There is a large human component to manufacturing Christmas lights and sometimes distances and “twist” will change the spacing between lights and sockets just a little bit.

What’s twist?

Next time you put your hands on a set of Christmas lights, note how the wiring harness is twisted and if you twist it more or take time to untwist it, you’ll see that the spacing between the bulbs will change slightly which affects the total length.

Why is this important?

For most folks a difference of a half an inch isn’t noticeable for their projects—wrapping trees, branches, swagging from one side of the patio to another—but for some customers who are building static custom projects, this variation could be super important.

For instance, if a project requires that a mini light bulb be EXACTLY 2.5 inches apart, if there is a 1/4 inch drift between a couple of bulbs in a 50-light string, it would throw off the perfection of the measurements. For projects where lights are inserted from the back into pre-drilled holes, this variation would be a problem.

The solution: Choose a light string with a wider spacing to allow for drift in widths and know there will be a little extra wire on the back of the project.

Example #1 : Holes on a prop marquis for a theater production require a 2.5-inch spacing. Choose a light set with 4-inch spacing to allow for any small drift in bulb spacing.

What could also cause a variation in socket spacing?

C7 and C9 sockets are manufactured by machine onto “lamp cord,” but there can be a small drift in socket installation due to a difference in tension or just the natural imperfection of the world—like a truly plumb wall is a rare and fantastic thing in construction.

For most Christmas light installations, this is imperceptible, and most of the time won’t be noticed.

When will it be noticed?

When you pre-install flat mount Christmas light clips and measure them EXACTLY every 12 or 15 inches (or, insert the spacing of your project here). A different approach here would be to install the clips and cord at the same time varying the distance between the sockets ever so slightly as you go.

If the clips MUST be exactly 12, 15, 18, etc. inches apart with scientific measurement precision, then choosing a spool of wiring with slighly wider spacing would be a better approach. For example, install a 15-inch spool of a project requiring perfect 12-inch spacing between socket centers.

The Wrap Up

Will most folks notice the small natural variation between lights or sockets on Christmas light strings?

No.

But for those folks who do require super-precision in their spacing, stepping up to a wider spacing with extra wire to allow for play in the lights is a great solution.

Recent Posts

Get this Look: Traditional Glass C9 Bulbs

Get this Look: Traditional Glass C9 Bulbs

This project used 625 LED bulbs installed into SPT-2 cord purchased in a bulk spool. To create this look, start with this supply list. Materials C9 Spool 1000-feet 9 inch spacing green wire SPT-2 C9 White Glass Light Bulbs C9 Rubber O-Ring Green Male Gilbert Plugs...

read more

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *

Related Blog Posts

Are C7 and C9 bulbs the same?

Are C7 and C9 bulbs the same?

Are C7 and C9 bulbs the same?Short Answer: No, they are very similar but are different sizes. Continue reading the long answer for photos and more information. Longer Answer: C7 bulbs are shorter with smaller diameters than C9s. Both are installed in 18 AWG...

read more
Christmas Lights Lingo!

Christmas Lights Lingo!

Common Christmas Lights Terminology and Vocabulary 5mm This is a shape of LED lens that is about the shape of and slightly smaller than a pencil eraser. It has been referred to as "wide angle" and "conical" in the past since there is a cone shape molded into the lens...

read more
Mini Light Spacing Discussed

Mini Light Spacing Discussed

There are 3 standard spacings for mini lights. Choosing the best spacing is essential for a polished project and can be tricky. We hope a quick visual will help you decide. Here are those three spacings: Standard Christmas Light Spacing A word about lengths of...

read more
Get This Look: Our Christmas Angel

Get This Look: Our Christmas Angel

Ed from Crawford, TX sent us this photo of his beautiful angel project. Here is what he had to say: Earlier this year I contacted you for help in securing lights and clips for our Christmas Angel. We had the angel for years but weather and time took their toll on not...

read more
LED Bulbs: Comparing the Whites! 2022 Edition

LED Bulbs: Comparing the Whites! 2022 Edition

This year, we are releasing Natural Pure White, the third available color white in our LED product line. Commercial C9 LED bulbs with E17 bases and 5mm light strings have been released for the 2022 season. More versions will follow next year. Here is a photo comparing...

read more
Get this Look: A Multiple Color Christmas!!

Get this Look: A Multiple Color Christmas!!

Thank you, Stephen, for sending us photos of your Christmas lights display. We enjoyed seeing the fun color combinations created using different styles of plug-and-play LED Christmas light strings. Projects like this are based on the types of products listed below....

read more